Defending “back away” concepts with a four man front.
The modern Spread offense is nothing more than the natural evolution of traditional schemes found in most Flexbone or Wing-T offenses. The main difference is the addition of multiple wide receivers and the location of the quarterback (gun or pistol). Take the traditional double slot look of the flexbone, add a couple receivers as the slots and spread them out, back up the QB to five yards and an offense now has the Spread’s 2×2 look. The plays that run from this particular set look similar to the Flexbone’s veer plays, obviously with some tweaks. The Triple’s Dive Option is the Spread’s Zone Read. The use of a different formation and location of the QB changes the conflicts of the defense. Running from the “gun” backfield allows the offense to have a full field range of reads. Utilizing pistol or dot (UTC – under the Center) leaves half the field to read and an offense cannot use a RB stretch path to challenge the defense’s fits.
A different defensive approach must be taken when defending an offense that runs from the gun compared to a team that primarily aligns from the pistol or dot. RBs in a pistol/dot backfield are forced to go downhill. Many defenses spill gap runs when defending these “downhill” formations. The best way to defend a downhill running team is to make the play bounce (or spill). When facing a gun offense, defenses must adjust the traditional run fit rules because the RB can easily bounce the play wider than his initial aiming point. The field of vision for the QB is also affected by a gun alignment compared to play designs from a Pistol/Dot alignment. From the gun alignment, the QB has a full field of vision, and the offensive coordinator can choose from a number of defensive players to read. The pistol/dot alignment cuts the field in half, allowing the backside defensive players to be more aggressive to the ball (see image below).
Running from the gun allows the offense to attack a defense horizontally as well as vertically. The full plane attack by gun backfields forces traditional defenses to adjust the way it defends the Spread, primarily adjusting the play of the defensive ends. In a pistol/dot alignment the offense must attack the defense either vertically (downhill run/gap runs) or horizontal (wide zone/buck sweep/speed option). The full plane attack of the gun backfield allows offenses to run concepts where the offensive players have the option to attack downhill or stretch to the sideline, utilizing the whole field. These particular plays are known as Bash concepts, or “Back Away.” Continue reading “Defending “Bash” Concepts”
MQ details 5 things to remember when facing a Spread Option team.
One offensive play that has not lost its power in modern football is the option. Spread offenses utilize option principles to test the mettle of a defense’s structure. An option offense forces the defense to play assignment football. Each player on a defense must stay gap sound and understand how the structure of the defense adapts versus each option play. When defending an offense that runs a variation of the Triple Option from Spread formations, a defense must have three main components: 1) a Dive player, 2) a Quarterback player, & 3) a pitch-man. Add pulling guards and trap plays and a Spread Option offense can inflict a lot of damage if the defense is not disciplined.
One of the main keys for defending Spread Option teams is eye discipline. It is imperative that each position on a defense understands his fits and read keys. When option teams motion it creates eye “candy” and distractors for defenders, especially at the linebacker level (Jet or Orbit motion). Spread Option teams also make it difficult to blitz. When applying pressure to an option offense the defense can expose itself to being a man short if the players do not understand how the pressure changes option responsibilities.
Many defenses choose to stay in base and fit the option. This can work if the defense has better players than the offense, but in most cases staying static helps the offense learn how to pinpoint a defense’s weaknesses. Understanding how Spread Option teams want to attack a defense’s structure is crucial in defending option offenses. Below are 5 tips for defending these types of teams: Continue reading “5 Tips for Defending Spread Option Teams”
Three ideas on defending the spread’s most even set.
One question I get on a regular basis is how does a Pistol backfield change the way a defense adjusts to the spread. When utilized with even formations (2×2), the Pistol can create hesitation in how a defense traditionally sets up against the spread. If setting the front formationally, a defense can align quickly and efficiently to most formations. For most four-down defenses, the front is set to a TE (Over Front) or away from Trips (Under Front) to allow maximum cover downs. The main issues arise when offenses employ the Pistol from a 2×2 or Doubles formation. Like Ace and Diamond, 10 personnel 2×2 Pistol forces the defense to choose where to set the front by field or boundary. If the offense aligns in the middle of the field (MOF), the defense has to make a choice between right or left. Because of the Pistol’s unique backfield alignment, the offense can identify the conflict player and attack, leaving the defense vulnerable.
In traditional “gun” formations the offense has put the back on one side of the formation. Teams can run same-side zones and gap plays (pulling runs), but many utilize the offset running back to read the defensive end or conflict player to that side of the back. There are three main front adjustments for defenses when defending 2×2 gun: 1) set the front to the back (Over), 2) set the front away from the back (Under), or 3) set the front to the field. The later becomes difficult in the MOF. I suggest in my book that a defense should, at the least, set the front to the back to maximize Sam’s cover down and deter read side RPOs. Versus a true even set like 2×2 Pistol, this can be impossible to determine if in the MOF.
Versus a 2×2 gun formation, the defense is broken into two parts, the read side (back’s side) and the fold side. Against a team the sets their back in the Pistol alignment the offense can easily establish where the conflict player is located and attack. This two-way-go can make it difficult for defensive coordinators to game plan against teams that run Pistol. Establishing front rules against a “gun” team is relatively easy, but to understand how to set the front versus 2×2 Pistol a defensive coordinator must first understand the formation. Continue reading “Defending 10 pers. 2×2 Pistol”
A 5 minute video on the “Art of X.”
This is a brief video on how to defend the modern spread attack by utilizing the structure of the Over Front. It covers everything from setting the strength to combating RPOs.
Continue reading “Episode #2 — MQ Quick Hits :: The Over Front”
An introduction to the three down Dime package.
One of the greatest luxuries in football is when a defense has enough depth in the secondary to create a Dime package. As spread has become the norm in football, the Nickel package, replacing a linebacker with a secondary player (usually a safety), has become the norm and many defenses’ base. Most teams have “tween” or hybrid players. Utilizing these players on defense has made it easier for defensive coordinators to adjust to the onslaught of spread teams. The Dime package, in particular, is different than its sister the Nickel package. Instead of replacing a LB with a safety, the Dime package puts two defensive backs in and replaces either two LBs (four-down) or a LB and a defensive lineman (three-down). The specific package being discussed in this article will cover the three-down, three safety Dime package most generally seen in college today.
A 3-4 Base
If a defense’s base is a 3-4, it can easily adjust to the spread by putting a Nickleback at Sam, much like its counterpart, the 4-2-5. A three-down Dime package takes the Mike off the field and inserts either a safety or a CB depending on the DC’s preference and the scheme being used. The front most used in a Dime package is the Buck Front or a 505 front. This ensures an edge rusher on either side of the quarterback that will define the box. The Nose’s role is to get a vertical push on the pocket and make the QB move. Below is a diagram of a 3-4 Buck Dime Package:
The first decision that has to be made when developing a Dime package is who is going to be part of the Dime package personnel? If looking to run more of a man scheme, a DC is more likely to bring on two cornerbacks and leave the two most athletic LBs on the field. As stated earlier, more defenses are shifting to a Nickel/Hybrid base. This means the traditional Sam LB is actually a safety. In the case above, the Nickelback is more than likely a third CB while the Dimeback is another safety. Continue reading “The Dime Package”
Find everything you need in one place.
Don’t take the bait. Don’t get out leveraged.
The jet motion is a great leveraging tool that offenses use to either move the defense (to counter the opposite way) or cut them off (speed kills). Auburn under Malzahn has utilized the jet motion to create deception and outmaneuver opponents. The speed at which the jet motion attacks, forces the defense to recognize the motion and adjust accordingly. Because the offense is using a fast motion, the defense is forced to plus alignments or spin an extra player down to the side the motion is moving. Many times, an offense uses their best athlete on the jet motion to focus even more attention on the movement. Offenses can even use the jet motion as a decoy because the defense has to honor the motion. To gain width, or to freeze an OLB/DE, offenses will send a jet motion to one side and run a play going away. This “freezing” of the defense allows an extra lineman to climb to the next level. This focus causes tunnel vision and can lead to exposure away from the direction of the motion.
Offenses use motion as a leverage tool. The Slot-T version of the spread, which Auburn runs, uses the jet motion to move the defense into compromising positions. Every defensive coach knows that when an offense uses motion (especially jet motion), the defense is forced to adjust promptly to the new formation. As stated earlier, the speed of the jet motion can make defenses over rotate to counteract the quick rotation of the offense. For many defensive coordinators, it is easier to rotate safeties (spin) than to bump linebackers because of the tempo at which the WR or slot is running. The introduction of unbalanced formations (X-off) and the utilization of the quarterback in the run game have made it more difficult for defenses to defend jet motion teams. In the picture above, Auburn used an unbalanced set to attack the Alabama defense. Out of the stack set shown, the offense can run a double lead jet stretch, running back counter weak, jet power read with two lead blockers or any QB run they choose. With so many play variations off of one formation and motion, it is no wonder many spread teams are using this type of motion to build whole offenses around. Any time the QB becomes a runner, the defense is stressed even more. The added value that the jet motion gives teams is undeniable. Continue reading “Defending Jet Motion”