5 Tips For Blitzing From The Secondary

MQ discusses 5 things to remember when blitzing from the secondary.

Utilizing the secondary in blitz packages is one of the most underutilized tools in a defensive coordinator’s toolbox. As many DC’s will point out, blitzing from the secondary will expose the defense to man-to-man coverage, but if used correctly (and in the right situations) a secondary blitz can hit home. When offenses create pass protection schemes they use the box numbers in front of them to divvy out responsibilities. Whether it is Big-on-Big (BOB), slide, or zone protection, the secondary is rarely accounted for in pass pro. Knowing this, and utilizing the secondary in pressure packages, can give the defense an added advantage and lead to QB pressures or sacks.

Using the secondary near the box is not only for the pass. Much like pass pro, some offenses do not account for the secondary in the box. This can be used to the defense’s advantage. Putting a secondary player near the box and knowing he will not be accounted for is an automatic win for the defense. The use of “trapping” the secondary near the box can also be used to confuse “check-with-me” teams. By placing a secondary player near the line of scrimmage (LOS), the offense must decide if the defense is blitzing or will drop the player back into coverage. By utilizing the secondary in pressure packages a DC can create a simple confusing alignment that offenses have to respect. If done right, using the secondary to leverage the boundary can add to the box numbers without spinning to single-high and exposing the defense to verticals down the seam (or a LB guarding a speedy slot WR).

Below, MQ explains 5 things to remember when blitzing from the secondary:  Continue reading “5 Tips For Blitzing From The Secondary”

Breaking Down the Run

MatchQuarter’s guide to breaking down your opponent’s run data.

03-sz

Of the two play types, breaking down the run concepts is much easier than the pass break down. There is less individual player variance and most run concepts are blocked relatively similar across offensive playbooks. The front of a defense many times will dictate the types of gap and option plays a defense might see. When looking to break down the run it is important for defenses to consider what defensive schemes are showing up in their opponent break down. If the teams in a league or district all run similar defensive schemes then the breakdown will stay relatively true across opponents. It is when teams run different fronts that the run breakdown can give false tendencies. One thing a defensive staff must keep in mind is how offenses change run schemes when facing a four-down front and a three-down front.

In order to keep the breakdown streamlined and efficient, each data point must help the staff paint a clear picture of what the offense is doing. Much like pass concepts, each offensive type (Slot-T, Air Raid, Pro Spread, etc.) has a unique way of blocking traditional runs. Formations add to the variations in blocking schemes as well. For instance, in a two-back power, the offense may choose to “J” block with the H-back and down block with the Tackle, while another offense may insert the H-back as a lead blocker and out-block with the Tackle. Each play is Power, but a defense needs to know the difference in blocking schemes. Luckily, most offenses choose a single blocking scheme and stick with it (therefore, no need to tag the variation), but when doing self-scout, it is important to be able to sort the Powers altogether and the variations between them. Even a play like Counter can be run several different ways from a two-back scheme. Is the offense pulling the Guard and Tackle, or are they using the H-back as the fold player? Add RPOs and a defensive coordinator can have a lot of information on one line. A defensive staff must have a structured, almost scientific, way of breaking down an opponent.  Continue reading “Breaking Down the Run”

MQ’s Link Book | #ArtofX

Find everything you need in one place.

MatchQuarters.com’s Philosophy of Football ::

** Each link will open in a new window, so bookmark this page and get to reading!**

Go deeper into defending the spread with MQ’s Book ::

Cautious Aggression: Defending Modern Football

Description | Buy it now

Connect With MQ ::

–         Twitter          –          YouTube          –          Instagram         –

Defending the Spread ::

Run Fits

  1. Zero the Mike (Belly-Key)
  2. Using Natural Gap Exchanges in Your Front Seven
  3.  Line Twists to Combat Heavy Zone Teams
  4. Defending the Zone Read
  5. Defending the Power Read
  6. Defending Split Zone
  7. 5 Tips for Defending Spread Option Teams

Coverages

  1. Defending the Air Raid with “Steal” Coverage
  2. “Read” Coverage (20p Field Robber)
  3. The Dime Package

Motions

  1. Defending Jet Motion
  2. Defending A-Behind and Flare Motion

Defending Spread Formations

  1. Defending 10p 2×2 Pistol
  2. Defending Stack and Bunch Sets
  3. Defending Trips/Empty:
    1. Why You Should Run an Under Front to 3×1 Sets
    2. Defending Trips — Fitting the Run
    3. Top Trips Coverages Explained
    4. Specific Split Field Trips Coverages:
      1. Defending Trips with Stress Coverage
      2. Defending Trips with Special Coverage
      3. Defending 3×1 Formations with Solo Coverage
    5. Defending Empty and Quads
  4. Defending Pro Spread (11p)
    1. 11 Personnel (Pro Spread)
    2. Defending single-width or “nub” formations
  5. Defending the Spread’s Top Unbalanced Sets

Defending RPOs ::

  1. RPO Stop Calls
  2. Using Split-Field Coverage to Counteract RPO & Check-With-Me Offenses

Defending Formations/Personnel Groups ::

  1. 12 Personnel (Ace/Ace Trey)
  2. 20 Personnel — Over vs Under (Setting the Strength)
  3. 21 Personnel (Defending Power Football From a Hybrid Defense)
  4. 30 Personnel
  5. Defending the Wing-T

Stop Calls/Pressures/Blitzes ::

  1. 5 Tips for Developing a Blitz
  2. How to Packaging Blitz Calls
  3. Building a Better Zone Blitz
  4. 5 Tips For Developing a Blitz
  5. Run Down Stop Calls
  6. Dog Check (Single-Dog Pressure)
  7. Attacking Empty/Quads
  8. 5 Tips For Blitzing From The Secondary

Quarters Pedagogy and Drill Tapes ::

  1. Teaching the Safeties
  2. Teaching the Corners
  3. Daily Musts for DBs
  4. Match Quarters Pass Distributions
  5. LB Philosophy and Fundamentals

3-4 Resources ::

  1. The Okie Front
  2. Defending Modern Spread from Okie
  3. Defending 11p from a 3-4
  4. The Tite Front (303/404)
  5. 3rd Down Calls From a 3-4

Install/Opponent Breakdowns/Practice/Self-Scout ::

  1. Four Day Install Plan for a 4-2-5
  2. Breaking Down an Opponent
  3. Down & Distance Data
  4. Breaking Down the Run
  5. Breaking Down the Pass
  6. Building a Hit Chart
  7. Weekly Schedule (Practice Plan)
  8. 5 Cut-ups to Improve Your Self-Scout

 

© 2017, MatchQuarters.com | Cody Alexander | All rights reserved.


As always, support the site by following me on Twitter (@The_Coach_A) and spreading the word to your coaching friends by liking and retweeting the articles you read (even sharing them via Facebook and LinkedIn).

Do not hesitate to email me with questions through the site’s CONTACT page or through my DM on Twitter. I enjoy speaking with you guys (iron sharpens iron).

Make sure to bookmark this page which is updated after each article.

– Coach A.

#FMT – Defending Split Zone

Ideas on combating a simple yet effective play.

Inside zone is not a new play to defensive coordinators; neither is the split zone, but it can give defenses fits if not fit up correctly. In its simplicity, it is a creative play to challenge a defense. Unlike its zone counterpart, the split zone creates an extra gap. The play itself is much like the counter without the pulling guard. When offenses run counter the linebackers can react to the pulling guard and fit the extra gaps. The split zone forces the linebackers to fit their gaps. This puts pressure on the secondary (mainly the safeties) to ensure their fits are correct. In the clip below, Iowa St. runs a gap plug blitz and the defensive end to the H-back runs up the field to hold the “C” gap. The out block by the “H” creates an extra gap. The safety to the play should have fit the inside shoulder of the “H” because the DE was taking the outside. Instead, the safety stays outside and is blocked out, leading to Baylor’s first score of the day. Bottom line, split zone has to be treated as though it is a gap play (think power/counter) or a defense will be gashed.

Teams that run inside zone are looking for the cutback. Versus a zone play, the linebackers have to fill their gaps (there is no puller). The offensive line creates a wall and allows the running back to cut back to the open weak side. In the clip above, ISU was running a run stop blitz, but because the safety didn’t fit his gap, it led to a touchdown. Teams that run split zone and the read-option offshoot, need to be played as though they are gap scheme heavy teams. Add RPO’s to this play, and it puts tremendous pressure on a defense, all from a simple zone scheme. There is hope, much like the zone read, a defense can attack this play on the principles of the offense. Continue reading “#FMT – Defending Split Zone”